Key takeaways
- Inspect the undercarriage first: tracks, sprockets, rollers, and idlers are the most expensive wear items on a tracked skid steer.
- Machines past 5,000 hours should be priced as parts units or rebuild candidates, while under 1,500 hours commands premium pricing.
- Tracks beat wheels on mud, sand, and slopes; wheels are cheaper to own on pavement and finished lots.
- Verify hours against cab wear, request service records and hour-meter photos, and get the PIN before any money moves.
- Match implements to the machine's standard-flow or high-flow hydraulic rating before buying augers, trenchers, or mulchers.
A skid steer with tracks for sale is worth buying when the undercarriage checks out, the hours match the price, and the listing survives a ten-minute evaluation before you drive out. This guide gives you the inspection checklist, price ranges, and negotiation points to close the deal on a tracked machine.
What should I check before buying a used tracked skid steer for sale?
A used tracked skid steer lives or dies on its undercarriage. Tracks, sprockets, rollers, and idlers are the most expensive wear items on the machine, and a full undercarriage replacement can run into thousands of dollars depending on model and track type, per undercarriage wear guidance from manufacturers like Caterpillar. Inspect it before you talk price.
Undercarriage and track wear: the five-point check
- Track condition — look for cracks, missing lugs, and exposed cords on both sides.
- Sprockets — hooked or sharpened teeth mean the sprocket is chewing through the track.
- Rollers — check for flat spots, oil leaks, and wobbling.
- Idlers — spin each one and look for play or leaking seals.
- Track tension — sagging or over-tight tracks both point to neglected maintenance.
Hours thresholds that move the price
| Hours | What it means for price |
|---|---|
| Under 1,500 | Low wear, premium pricing |
| 1,500–3,000 | Budget for undercarriage work soon |
| 3,000–5,000 | Expect track, roller, or idler replacement |
| 5,000+ | Price it as a parts machine or full rebuild |
Verify hours against wear on the seat, pedals, and hand controls — a wiped-out cab with 900 hours is a red flag.
Fluids, hydraulics, and a hot-start test
Check hydraulic oil for milky discoloration, watch a lift cycle for drift, and ask for a hot start after the machine has run. Request service records and the hour-meter photos before you drive out. Manufacturer documentation for the specific model, whether it's a Bobcat, CAT, or a unit listed under Hyster, tells you the factory service intervals to compare against.
How do track skid steer loaders compare to wheeled models for my jobsites?
The short version: tracks buy you flotation and traction on soft or sloped ground, wheels buy you lower running costs and faster travel on pavement. Neither is better overall. The right question is what your machines sit on for most of their hours.
When tracks win
A tracked machine spreads its weight over a much larger contact patch, so ground pressure drops and you can work mud, sand, or fresh topsoil without bogging down or tearing up turf. Traction on wet grass and slopes is also better, which matters for landscaping and utility work. We break the full comparison down further in our skid steer vs compact track loader guide. If your jobsites include batch plant yards after rain, ranch ground, or unfinished grades, tracks pay for themselves in days you would otherwise lose.
When wheels win
Wheeled skid steers cost less to buy, wear through tires instead of undercarriages, and move quickly between spots on concrete or asphalt. A steel undercarriage on a tracked machine is a real wear item, and rebuilding one costs far more than a set of tires. For dealers and rental fleets, wheeled units also tend to show hours more gently in the spec sheet. If your work is mostly paved lots, warehouses, and road-adjacent sites, wheels are the cheaper machine to own.
How much should I expect to pay for a tracked skid steer loader for sale?
Most used tracked skid steers trade between roughly $15,000 and $60,000, with compact older units under 2,000 hours at the low end and late-model cab machines with high-flow hydraulics near the top. Auction results are the cleanest benchmark: Ritchie Bros. publishes sold-price data for used skid steers you can filter by hours and region before you make an offer.
What drives the price up or down
Hours matter most. A machine under 2,500 hours with documented service records can price 20-30% above an identical unit past 5,000 hours, and undercarriage wear on tracked models is the single biggest deduction, since a replacement track set alone can run several thousand dollars.
Options move the number too. An enclosed cab with heat, high-flow hydraulics for running a mulcher or cold planer, and newer tracks each add real money. Low-flow machines limit your implement choices, which is worth checking before you pay a premium.
When you compare pricing across dealer directory listings, count active listings against asking prices the same way you would for your own inventory. Browse current tracked units on BigEquipCo, including listings from manufacturers like Simplicity, to sanity-check any seller's number.
Which skid steer implements for sale should I buy with a tracked machine?
Tracks give you flotation and push, so pair them with ground-engaging implements that punish wheeled machines on soft sites. Augers, trenchers, mulchers, and grapple buckets are the four worth buying first if you do fence lines, land clearing, or utility work.
Match implements to hydraulic flow
Check the machine's standard-flow or high-flow rating before you buy any implement. A mulcher or a wide trencher usually needs high flow; an auger and most buckets run fine on standard. Buying a high-flow implement for a standard-flow tracked skid steer is money spent on a tool that will not turn.
Match the auger bit diameter to your post spec, and confirm the trencher's chain width against the pipe or cable you are laying. When you add attachments, budget for couplers, hoses, and wear parts; keep spares on hand through Parts Equipment for Sale | BigEquipCo so a blown hose does not idle the machine mid-job.
How do I evaluate a listing before I drive out to see the machine?
A good listing tells you hours, serial or PIN, undercarriage condition, and service history before you call. If any of those are missing, ask for them by email so you have it in writing. On BigEquipCo, every active listing carries hours and PIN fields, so you can compare machines side by side without phone tag.
Red flags in photos and descriptions
- One or two photos, all glamour shots. No undercarriage, no track wear, no cab. Assume the worst.
- "Hours unknown" or "meter replaced." Ask for a photo of the gauge or walk away.
- No PIN offered. A seller who won't share the PIN may be hiding a salvage or theft history.
- Vague service claims. "Runs strong" means nothing; "newer track tensioners, receipts available" means something.
- Mismatched specs. If the listing calls it a tracked model but the specs show wheeled ground pressure numbers, question the whole write-up. Tracks spread weight and lower ground pressure versus wheels, which is why spec sheets matter when comparing machines.
Also check what else the seller lists. A dealer with 20 to 30 active listings across skid steers, dump trucks, and telehandlers likely has paperwork in order. One lonely listing with stock photos deserves a longer phone call before you burn a day on the road.
How do I value my current machine if I want to sell my skid steer and upgrade?
Start with hours, undercarriage, and recent repairs. A tracked skid steer with 2,500 hours and fresh tracks prices differently than the same machine at 4,000 hours with worn sprockets. Pull comparable listings for your exact model and note the hours, not just the ask.
Trade-in vs private sale
A trade-in gets you the fastest exit and one trip to the dealer, but expect a wholesale number below what you'd see on a retail listing. A private sale on MachineryTrader or EquipmentTrader takes longer and means fielding calls, but it captures retail money, which dealers on Heavy Equipment Forums describe as where MachineryTrader pricing sits (heavyequipmentforums.com).
If you're moving several pieces, list the skid steer where buyers already browse active listings, and keep the want-to-buy boards in mind for oddities like a dedicated batch plant or extra telehandlers. Price 10-15% under the strongest comparable to move it inside a month.
Where is the best place to find track skid steer loaders for sale — dealer, auction, or marketplace?
Judge every channel on the same five criteria: price transparency, hours and undercarriage documentation, listing depth, fees, and how fast you can inspect and move the machine.
Running every channel through the same five criteria
Dealers give you the cleanest paperwork and often a trade-in path, but you pay retail. Auctions like IronPlanet move inventory fast, yet you usually buy as-is with limited inspection time. MachineryTrader and EquipmentTrader list heavy dealer inventory, which is why sellers report those marketplaces skew toward retail-or-above used pricing.
BigEquipCo runs through the same criteria honestly: dealer directory listings show hours and asking prices, want-to-buy postings surface off-market machines, and listing fees sit below legacy platforms. The shortcoming: fewer active listings than the largest marketplaces, so you may not find the exact tracked skid steer or attachment package near you. Check hydraulic flow specs against the manufacturer's own pages before you buy implements separately.
What questions should I ask a seller before committing to a tracked skid steer purchase?
Ask five questions before money moves. Start with hours and service records, since undercarriage and drive-motor wear on tracked machines is expensive and hours matter more than model year. Then ask whether the seller is the original owner, who did the servicing, and why the machine is for sale, because a fleet rotation answer is fine while a vague one deserves a longer inspection. Ask whether transport is included or you arrange the haul, since freight on a tracked skid steer can move the real price by hundreds of dollars. Finally, ask what payment the seller takes and whether a deposit is refundable if the undercarriage checks out bad on arrival, get every answer in writing before you send anything, and write the answers into a follow-up email the same day so a record exists if a dispute comes up later.
FAQ
How many hours is too many on a used track skid steer?
Past 5,000 hours, treat the machine as a parts unit or a full rebuild candidate. Between 3,000 and 5,000 hours, budget for track, roller, or idler replacement. Under 1,500 hours commands premium pricing, and 1,500 to 3,000 is workable if you plan undercarriage spending soon. Always match hours against cab wear.
Are tracked skid steers worth the extra maintenance cost?
Yes, if your ground is soft, wet, or sloped. The undercarriage is a real wear item that costs thousands to rebuild, but tracks deliver traction and flotation that wheels cannot match on mud, sand, or fresh turf. If most of your hours are on pavement or finished lots, a wheeled machine is cheaper to own.
Can I replace tracks myself or do I need a dealer?
Most owners can replace rubber tracks themselves with hand tools, a way to break track tension, and the model's service manual. Rollers, idlers, and sprockets are heavier work that may need a press or a shop. Follow the factory service intervals for your specific model, whether Bobcat, CAT, or another brand.
Is a track skid steer good in mud and soft ground?
That is where tracks earn their money. A tracked machine spreads weight over a much larger contact patch, dropping ground pressure so you can work mud, sand, or fresh topsoil without bogging down or tearing up turf. Traction on wet grass and slopes is also better, which matters for landscaping and utility jobsites.
What paperwork should I get when buying a used skid steer?
Get the PIN or serial number, hour-meter photos, service records, and a bill of sale before money moves. Ask about the PIN early, since a seller who won't share it may be hiding salvage or theft history. Confirm payment terms in writing, including whether a deposit is refundable if the undercarriage fails inspection.
